200W 15A:
200W DC-DC high voltage power synchronous buck module
DC8-60V wide voltage input, 1-36V stepless adjustable output
The maximum peak output current 15A
Perfect ultra-efficient circuit design up to 94% Low Ripple
Parameter:
Name: 200W adjustable synchronous buck module
Type: Non-isolated step-down module (BUCK)
Aluminum housing Size: 70 x 38 x 31mm / 27.5"x15" x12"
Input voltage: DC8-55V (limit 60V, please leave allowance)
Output voltage: DC1-36V continuously adjustable (the default output 12V)
Output Current: Normal 10A , MAX15A
Output power: natural cooling ventilated long-term power 100W
To enhance heat dissipation up to 200
Such as long working hours, please note left margin and make the heat rise
Operating temperature: -10 to +85 degrees
Operating frequency: 180KHz
Conversion efficiency: up to 94%
Overcurrent protection: Yes (the output current exceeds (15A) current maximum sample protection only)
Reverse polarity protection: (reverse does not burn)
Wiring: high current terminals, solderless, IN + input is positive, IN- is the input negative, OUT + positive output, OUT- output negative
160W 8A:
Working frequency: 300KHz
Conversion efficiency: up to 95%
Output current: 0-8A (maximum)
Dimensions: 70mm x 39mm x 31mm
Operating temperature: -40 to +85 °C
Input voltage: 4.5-32V (please do not exceed 32V)
Output voltage: 0.8-30V (continuously adjustable)
Output power: 100W, 160W (enhanced heat dissipation)
Short circuit protection: yes (please try not to short circuit)
Voltage Conversion: 12 to 3.3V; 12V to 5V; 24 to 5V; 24V to 12V
Over-temperature protection: yes (automatically turn off the output)
Input reverse connection protection: Yes (can not be reversed for a long time)
Installation method: terminal, no need to solder
IN+: Input positive
IN- : input negative
OUT+: output positive
OUT-: output negative
Application:
Power Transformers
Battery step down, etc
Vehicle LED power supply
24V Car laptop power supply
Small power motor speed regulation
Industrial equipment depressurization
DIY adjustable regulated power supply
100W 6A:
Module nature: synchronous rectification non-isolated buck module
Input voltage: 10-90VDC
Output voltage: 1.5-60VDC (applicable to applications where the input voltage is higher than the output voltage and cannot be boosted)
Output current: Max 6A
Maximum power: 100W (maximum current 6A at low voltage output. 100W at high voltage output)
Working frequency: 180KHZ
Conversion efficiency: 97.5% (typical value)
Input anti-reverse connection: Yes
Aluminum shell size: 70MM * 38MM * 31MM
Weight: about 70g
80W 5A:
Size: 70 x 39 x 32 mm
Wide input voltage range: DC 6 -35V
Output voltage: DC 1 -35V
Conversion efficiency: 90%
Maximum output current: 5A
Maximum input current: 7A
Constant current adjustment range: 0.05A ~ 5A
Note:
1. Do not reverse the positive and negative terminals, otherwise this item will be damaged.
2. When working for a long time, the input current and output current may not reach the maximum value.
3. The auto boost/buck module supports input voltages above or below the output voltage.
4.90% conversion efficiency is measured as 12V input voltage and 19V / 2.5A output voltage.
5. Conversion efficiency is related to input and output voltage and current.
This is a voltage regulator module without constant current mode, so it cannot be connected directly to the battery.
Package Included
1 Pcs DC Step-down Module
