We are selling from Japan.
Our Products are Authentic only.
★★★★★★★★★★★
【Cautions for using electrical products】
When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions.
Since the plug type is Japan type(A or B type), please check the voltage and use a transformer.
Please note that a transformer is different from a conversion adapter.
We are not responsible for malfunctions caused by use without a transformer.
★★★★★★★★★★★
``Hikari Beauty 3 PRO'' is a home-use light beauty device created from the voices of approximately 2,000 estheticians.
Adopts efficient light wavelength based on TBC Salon's track record of light hair removal.
[4 modes] Auto single mode, auto continuous mode, manual single mode, manual continuous mode
Dimensions: Handpiece/70mm x 50mm x 190mm Power unit/130mm x 65mm x 49mm
Storage method: This product is an electrical product, so please read the instructions in the instruction manual carefully before use.
■Product introduction
``Hikari Beauty 3 PRO'' is a home-use light beauty device created from the voices of approximately 2,000 estheticians.
Adopts efficient light wavelength based on TBC Salon's track record of light hair removal. Continued use will lead to smooth skin without unwanted hair.
Adopts the AMP method (method of continuously irradiating multiple times in one shot) using patented technology (*1).
Equipped with a continuous irradiation function of up to 10 shots, you can quickly treat a wide range of areas such as arms and legs.
Equipped with a long-life (*2) lamp. Approximately 300,000 times (*3) of irradiation is possible.
(*1) Patent No. 5198671 (IPL device that can adjust energy level)
(*2) Comparison with our conventional product Hikari Beauty2
(*3) When used at irradiation level 1
◆4 modes
auto single mode
auto continuous mode
manual single mode
Manual continuous mode
◆How to use
＜The day before＞
①Shave the irradiated area with a razor, etc.
② Place the included cooling pack in the freezer.
＜On the day＞
① Clean the irradiated area.
② Plug in the power cord.
③ Wear the included goggles.
④Press the power button on the main unit (handpiece) for more than 2 seconds to turn on the power.
⑤Press the flash/mode button for more than 2 seconds to select the mode.
⑥ Cool the area to be irradiated with a cooling pack wrapped in a towel until the skin becomes cold.
⑦Place the irradiation surface of the handpiece in close contact with your skin.
⑧Press the flash/mode button to irradiate the area cooled in step ⑥.
⑨ Cool the irradiated area again with a cooling pack.
⑩Repeat steps ⑥ to ⑨.
⑪Press the power button on the handpiece for more than 2 seconds to turn off the power and unplug the power plug.
⑫ Moisturize your skin with lotion or cream.
⑬Clean the lens.
*Please wear the included goggles during the light treatment.
*Please use the included cooling pack to cool down the irradiated area before and after the light treatment (irradiation).
*When holding the handpiece, be sure not to block the cooling ventilation opening.
*Please read the instruction manual for details on treatment methods.
──────────────────────────────────
[Size/Weight/Set contents/Precautions]
Handpiece size: Approximately W70 x D50 x H190 (mm)
Power supply unit size: Approximately W130 x D65 x H49 (mm)
Mass: Approx. 420g (handpiece + power supply unit)
Set contents: Main unit (handpiece + power supply unit) x 1, power cord x 1, goggles x 1, cooling pack x 1, cleaning cloth x 1, instruction manual (with warranty) x 1, quick manual x 1
Notes:
*This product is an electrical product, so please read the instructions in the instruction manual carefully before use.
*Before use, be sure to do a pre-test to make sure there are no abnormalities on your skin.
*This product is not a medical device.
*When using, please follow the contraindications and treatment methods listed in the instruction manual.
