【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
This is a front and rear set of a 2mm thick polycarbonate lens protector made in Japan and a lens cap made overseas. Protect your precious optical equipment with a polycarbonate lens protector.
[For VictOptics ZOD 1-4x20] Can be used with other models as long as the scope is 25.4mm in front and 40mm in back. [For VectorOptics FORESTER1-5X24GENⅡ] Can be used with other models as long as the scope is 30mm in front and 40mm in back. [Bushnell AR Optics 1-4x24 AR71424/AR71424I] Can be used with other models as long as the scope is 30mm in front and 42mm in back. [For Marui Pro Scope 3x9] Can be used with other scopes as long as the front is 53mm and the rear is 39mm. [For Leupold VX-FREEDOM 1.5-4x20mm] Can be used with other scopes as long as the front is 25.4mm and the rear is 39mm.
A scope lens protector made of polycarbonate that boasts approximately 50 times the strength of acrylic plates. The polycarbonate lens protector is approximately 2mm thick and is resistant to direct hits from BB bullets. Please check the size before purchasing. If it is loose, adjust it with tape, etc. Please remove the protective film before use.
Rifle scope lens cap is an important accessory to protect your scope lens. Made of high-quality materials, it protects your lenses from scratches and dirt. By keeping the cap on when not in use, you can extend the life of the scope and maintain clear vision at all times.
Please note that colors and details may change depending on production time. Because it is made overseas, there may be uneven coloring. Actual appearance may differ depending on monitor and lighting. Please refrain from purchasing if you have metal allergies. There are individual differences in the sliding resistance of the buttons. Product Features There may be some damage to the box during inspection. There are small parts. Never put it in your mouth. There is a risk of suffocation. Please keep out of reach of small children and pets. Do not handle this product roughly, such as pulling or throwing it. This is dangerous and may cause damage or injury.
This is a front and rear set of a 2mm thick polycarbonate lens protector made in Japan and a lens cap made overseas. Protect your precious optical equipment with a polycarbonate lens protector.
[For VictOptics ZOD 1-4x20] Can be used with other models as long as the scope is 25.4mm in front and 40mm in rear. [For VectorOptics FORESTER1-5X24GENⅡ] Can be used with other models as long as the scope is 30mm in front and 40mm in back. [Bushnell AR Optics 1-4x24 AR71424/AR71424I] Can be used with other models as long as the scope is 30mm in front and 42mm in back. [For Marui Pro Scope 3x9] Can be used with other scopes as long as the front is 53mm and the rear is 39mm. [For Leupold VX-FREEDOM 1.5-4x20mm] Can be used with other scopes as long as the front is 25.4mm and the rear is 39mm.
A scope lens protector made of polycarbonate that boasts approximately 50 times the strength of acrylic plates. The polycarbonate lens protector is approximately 2mm thick and is resistant to direct hits from BB bullets. Please check the size before purchasing. If it is loose, adjust it with tape, etc. Please remove the protective film before use.
Rifle scope lens cap is an important accessory to protect your scope lens. Made of high-quality materials, it protects your lenses from scratches and dirt. By keeping the cap on when not in use, you can extend the life of the scope and maintain clear vision at all times.
Please note that colors and details may change depending on production time. Because it is made overseas, there may be uneven coloring. Actual appearance may differ depending on monitor and lighting. Please refrain from purchasing if you have metal allergies. There are individual differences in the sliding resistance of the buttons. Product Features There may be some damage to the box during inspection. There are small parts. Never put it in your mouth. There is a risk of suffocation. Please keep out of reach of small children and pets. Do not handle this product roughly, such as pulling or throwing it. This is dangerous and may cause damage or injury.
