【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
[Oscilloscope] The 2C53T is equipped with a 2-channel oscilloscope function with a bandwidth of 10Mhz and a real-time sample rate of 50MS/s. Equipped with complete trigger functions (auto, normal, single), maximum measurement voltage 400V, vertical axis sensitivity 200mv/div-10v/div, and three waveform display modes: Y-T/roll/X-Y.
[Multimeter] Equipped with a digital multimeter function with 4.5 digits 19999 counts true effective value, can measure DC/AC voltage, DC/AC current, resistance, capacitance, diode, continuity check, temperature, etc. Maximum measurement is AC 750V, DC 1000V. Equipped with automatic measurement function, just press the AUTO button to automatically measure
[Transistor tester] Can output 13 types of "parameter variable waveforms" including sine wave, square wave, pulse wave, ramp wave, noise, and DC. Waveform output frequency can be adjusted from 0 to 50 KHz, output amplitude from 0 to 3 V, and output duty ratio from 0 to 100%. Note: Oscilloscope, transistor tester, signal generator, three functions cannot be used at the same time
[Functionality] 2C53T combines oscilloscope + multimeter + signal generator, three functions in one, and has better flexibility, more powerful waveform capture, and more detailed waveform display with hardware ARM + FPGA + ADC. In addition, Lissajous figure, cursor measurement, FFT spectrum, and afterglow display functions are available to meet various waveform analysis needs.
[Portable] A small, lightweight and multifunctional handheld tester. Built-in rechargeable lithium battery, can standby for 6 hours when fully charged. It is compact but has many functions, has a storage capacity of 1Kpts, and supports Type-C interface. Can be connected to a computer and can read saved images and waveform screenshots
[Japanese manual] PDF Japanese manual is available. If you contact FNIRSI, we will send you a PDF Japanese instruction manual. How to contact: Select the applicable order in "Order History" → Click "Problems with Order" → Click "Contact Seller" → Enter your question and click "Send"
oscilloscope parameters
Number of channels: 2 channels
Sampling rate: 250MS/s
Anacro Bandwidth: 50Mhz
Time base: 10ns~20s
Vertical sensitivity: 10mv/div ~ 10v/div (x1)
Trigger function: auto, normal, single
Display mode: Y-T/roll/X-Y
Waveform storage, PC checking possible
multimeter parameters
True RMS value: 4.5 digits 19999V
Measurement range: AC maximum 750V, DC maximum 1000V
Measurement items: DC/AC voltage, DC/AC current, resistance, capacitance, temperature, diode, continuity measurement
Automatic measurement: auto function
Function generator parameters
Abundant output waveforms: sine wave, square wave, sawtooth wave, half-wave rectification, full-wave rectification, staircase wave, inverse staircase wave,
Exponent rise, exponent fall, DC, multi-audio, sink pulse, Lorentz
Output frequency: 0~50KHz changeable
Output amplitude: 0 to 3V changeable
Duty ratio: 0~100% changeable
others
Display size: 2.8 inch
Display resolution: :320*240
Product size: 167x89x35mm
Product weight: 300g
