Hinoki Bath Chair Large Made In Japan Chair Chair Hinoki Bath Chair [Hinoki King] [Bath Wooden]

[Hinoki] Hinoki bath chair, made in Japan [Size] Approx. 33cm x 20cm x Height 24.5cm [Weight] Approx. 1675g [Material] Body: Hinoki Painting: Silicone painting Leg rubber: Silicone rubber [Features] - This is a commercial-grade bath chair used in inns and hotels. - Silicone coating is applied that hardens inside the wood and prevents water from penetrating. It dries quickly and prevents dark spots. - Comes with anti-slip rubber legs that will not damage the floor. [Care] - After use, please wash with water using a soft sponge. ・Scrubbing with a hard scrubbing brush may damage the surface or weaken the effectiveness of the paint. - After washing, wipe off the water thoroughly and dry in the shade in a dry place. If you leave it wet, black mold (mold) will easily form. Simply wiping the water thoroughly with a bath towel after use will help prevent mold from forming. ・After wiping off the water, dry it in the shade in a dry place. ・Do not use bleach. [Precautions for use] ・Please refrain from using it for purposes other than its intended purpose. Applying excessive load may cause damage. ・Never climb on the chair. There is a risk of falling. ・If you dry it rapidly in direct sunlight or in a bathroom dryer/bathroom heater, there is a risk of cracking or deformation. ・If the joints between parts become loose, please stop using it immediately. - Leg rubber may come off due to friction with the floor. Be sure to lift the bath chair when moving it. If the leg rubber comes off, please insert it again and use it, or remove all the leg rubber and use it. - A silicone coating is applied that penetrates into the wood and hardens to prevent water from entering, but it does not completely prevent blackheads (mold). By wiping the water thoroughly and keeping it dry, it will stay clean for a long time. [Features] - This is a commercial-grade bath chair used in inns and hotels. - Silicone coating is applied that hardens inside the wood and prevents water from penetrating. It dries quickly and prevents dark spots. - Comes with anti-slip rubber legs that will not damage the floor. [Care] - After use, please wash with water using a soft sponge. ・Scrubbing with a hard scrubbing brush may damage the surface or weaken the effectiveness of the paint. - After washing, wipe off the water thoroughly and dry in the shade in a dry place. If you leave it wet, black mold (mold) will easily form. Simply wiping the water thoroughly with a bath towel after use will help prevent mold from forming. ・After wiping off the water, dry it in the shade in a dry place. ・Do not use bleach. [Precautions for use] ・Please refrain from using it for purposes other than its intended purpose. Applying excessive load may cause damage. ・Never climb on the chair. There is a risk of falling. ・If you dry it rapidly in direct sunlight or in a bathroom dryer/bathroom heater, there is a risk of cracking or deformation. ・Joining of parts is poor. If it gets wet, please stop using it immediately. - Leg rubber may come off due to friction with the floor. Be sure to lift the bath chair when moving it. If the leg rubber comes off, please insert it again and use it, or remove all the leg rubber and use it. - A silicone coating is applied that penetrates into the wood and hardens to prevent water from entering, but it does not completely prevent blackheads (mold). By wiping the water thoroughly and keeping it dry, it will stay clean for a long time.