ZK 502C HIFI Power Amplifier Board 50W Convenient DIY Clear Sound Filter Inductance TPA3116 Audio Po

Feature: 1. This ZK 502C HIFI power amplifier board is made from quality printed circuit board, which is sturdy and durable. 2. The ZK 502C HIFI power amplifier board adopts audio input with AUX and BT, two in one design. 3. The potentiometer adjusts the volume through the switch, and it is easy to control the volume. 4. This audio power amplifier is an ideal choice for DIY speakers. With filter inductor, the sound is clear. 5. Adopting copper DC connectors and barrier terminals. Can withstand large currents, no heat, no damage to the wires, good wiring, and short‑circuit. Specification: Item Type: ZK 502C HIFI Power Amplifier Board Material: Printed Circuit Board Purpose: Power Amplifier Board Model: ZK-502C Chip: TPA3116D2 (with AM Interference Suppression Function) With or Without Filter: Yes (the Sound is More Round and Clear After Filtering) Adapted Power Supply Voltage: 5-27V (optional 9V/12V/15V18V/24V and Other Adapters, High Power Recommended High Voltage) Adapted Speakers: 30W~200W, 4Ω-8Ω Number of Channels: Left and Right Dual Channels (stereo) BT Version: 5.0 BT Transmission Distance: 15 Meters (unobstructed) Protection Mechanism: Overvoltage, Undervoltage, Overheating, Dc Detection, Short Circuit Protection Power Supply Voltage: 12V 8 Ohm Speaker/12W (left Channel) + 12W 4 Ohm Speaker/20W+ 20W (right Channel) 15V 8 Ohms/18W +18W, 4 Ohms/more Than 30W + 30W 19V 8 Ohms/32W+32W, 4 Ohms/more Than 45W +45W 24V 8 Ohms/38W+38W, 4 Ohms/more Than 55W +55W Package List: 1 x ZK 502C HIFI Power Amplifier Board 2 x Acrylic Board 1 x Screwdriver 9 x Screw 4 x Brass Connecting Rod 1 x Square Heat Sink 1 x Gasket 1 x Nut 1 x Knob 1 x Cable Note: 1.If the Audio Input is Sufficient and the Power Supply Voltage/current is Sufficient, There is Enough Output Power. the Higher the Power Supply Voltage, the Greater the Relative Power. Speakers with Different Impedances Will Have Different Output Power. in the Case of Sufficient Voltage and Current, the Greater the Ohm of the Speaker, the Smaller the Relative Sound Power. Please Make Sure That the Power of the Adapter is Greater Than the Actual Working Power of the Amplifier. 2.The power switch on the board is the standby switch. After the switch is turned off, the machine is in the standby state with low power consumption. Turn off the power completely or unplug the DC plug on the machine for a long time. 3.Use an adequate power adapter to connect the power amplifier board, otherwise the sound will be distorted.