Sanwa Supply PoE-USB Type-C conversion adapter (PD60W power supply/network communication compatible) LAN-ADPOEC

[Product Infomation]

Brand : Sanwa Supply Materials : Plastic

[Product Description]

・This adapter converts PoE (Power Over Ethernet) to USB Type-C and allows stable data communication while supplying PD power to computers, tablets, POS terminals, etc. - Since the main unit operates on PoE power, there is no need for a power source at the location where the conversion adapter is installed. - Compatible with IEEE802.3bt (90W) PoE standard and supports PoE power input up to 90W. PD power supply from USB Type-C supports up to 60W. *Limited to cases with PoE power supply of IEEE802.3bt (60W) or higher. -By installing this product up to 100m away, you can perform PD power supply and data communication to computers, tablets, etc. even in places where there is no power outlet. *The maximum cable length of 100m is a theoretical value according to the LAN standard, and the actual cable length that allows LAN communication and PoE power supply is within about 80m. -Equipped with an LED that allows you to check communication and power supply status.

●This adapter converts PoE (Power Over Ethernet) to USB Type-C and allows stable data communication while supplying PD power to computers, tablets, POS terminals, etc. ●Since the main unit operates on PoE power, there is no need for a power source at the location where the conversion adapter is installed. ●Compatible with IEEE802.3bt (90W) PoE standard and supports PoE power input up to 90W. PD power supply from USB Type-C supports up to 60W. *Limited to cases with PoE power supply of IEEE802.3bt (60W) or higher. ●By installing this product up to 100m away, you can perform PD power supply and data communication to computers, tablets, etc. even in places where there is no power outlet. *The maximum cable length of 100m is a theoretical value according to the LAN standard, and the actual cable length that allows LAN communication and PoE power supply is within about 80m. ●Equipped with an LED that allows you to check communication and power supply status. ●This product is for indoor use only. ≪Caution≫ *The LAN cable used for PoE power supply should be a category 5e/6/6A straight cable with a thickness of 24AWG or more. Recommended cable (manufactured by Sanwa Supply) KB-T6POE series (KB-T6POE-03BK etc.) (22AWG) KB-T6TS series (KB-T6TS-03BLN etc.) (23AWG) KB-T5T series (KB-T5T-03N etc.) (24AWG single wire) *Please use the included Type-C-C cable to connect this product and a USB Type-C device. *When using a commercially available USB Type-C-C cable, please use a Type-C-C cable that is within 1 m in length and supports PD power supply and communication. ■Maximum transmission speed: 100Mbps (100BASE-TX) ■Compliant standards: IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX), IEEE802.3x (Flow control for Full-Duplex) PoE power receiving port/IEEE802.3af/at/bt (up to 90W) ■Communication mode: Full duplex/Half duplex ■Port configuration: 100BASE-TX/10BASE-T (RJ-45) AUTO-MDIX PoE port (PSE) x 1 port USB Type-C (PD compatible) x 1 port ■PoE power supply method: Alternative A, Alternative B ■Applicable LAN cable: UTP category 5e/6/6A straight cable with a thickness of 24AWG or more *Please use a PoE compatible LAN cable. ■Power consumption (maximum): Approximately 10W ■Operating environmental conditions: Temperature/0~40℃ Humidity/20~80% (no condensation) ■Environmental conditions during storage: Temperature/-20~70℃ Humidity/20~80% (no condensation) ■Housing material: Plastic ■Set contents: USB Type-C-C cable (approx. 0.5m) x 1, instruction manual x 1 ■Color: White ■Size: W100×D60×H20mm ■Weight: Approx. 200g ■Interface standard: USB 5Gbps (USB3.2 Gen1/3.1 Gen1/3.0) compliant ■Connector shape (upstream): USB 5Gbps Type-C connector female ■PD maximum output: 60W *Requires PoE power supply of IEEE802.3bt (75W) or higher

[Important Note - For Overseas Customers]

Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.

1. Legislation and safety standards This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country. Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country.

2. About electrical products [Voltage compatible] When using electrical appliances, please note that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions.

[Plug type] Our products use the Japanese plug type (A type or B type). Please use a conversion adapter if necessary.

[Important notes regarding transformers and adapters] A transformer adjusts the voltage to suit the requirements of the equipment. Conversion adapters only change the shape of the plug and do not adjust the voltage. Using only the conversion adapter without a transformer may damage the product.

[About responsibility] We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer.

3. Language and manual Product instructions and displays may only be in Japanese. The English version of the manual can be downloaded from our website.