Lens Plate for Nikon Z VR Lens Japanese F-Foto 180-600mm f/5.6-6.3 (Z Mount, Arca-Swiss Compatible, Manufacturer) LP-Z180600









Popis
[Product Overview] This is an Arca-Swiss compatible lens plate for the Nikon Z-mount telephoto zoom lens Z 180-600mm f/5.6-6.3 VR. [Product Features] While this lens requires a screw-mounting system, this plate allows for one-touch mounting and removal. It is specifically designed to fit the base of the original tripod mount. Regarding compatibility: The Arca-Swiss compatible shape is not a strict standard, so some products (especially lever-type heads) may not be compatible. If you discover after purchase that a product not listed here is incompatible, please contact us. [Confirmed compatibility] Heads: RRS BH-30, BH-25LR, B2-L, GITZO GH1382QD, Peak Design Travel Tripod, SIRUI A-10R, Leofoto G4, LH-30, ARCA-SWISS P0 hybrid, Vanguard BH-50, Neewer ball head, TYCKA ball head, Neewer QR clamp, SUNWAYFOTO DLC-60LX, MENGS CL-50S, DC-38Q. [Incompatible heads] FALCAM TreeRoot. For other heads, please contact us. We are currently collecting information. [About F-Foto] [Established in 2012] We are a Japanese camera accessory manufacturer (headquartered in Gunma Prefecture). [Online Only] As an online-only manufacturer without a physical store, we are able to deliver high-quality products at reasonable prices. [Many Highly Rated Products] We offer a wide variety of highly rated (over 300 reviews) original products, including shoe covers, tripod mounts, lens plates, and compatible hoods. [High Quality (Inspected at Domestic Factories)] All products manufactured overseas are inspected at our domestic factories and delivered to Amazon warehouses before being delivered to customers. [Reliable Guarantee] In the unlikely event of an initial defect, we will provide replacement support, so you can purchase with confidence. [Materials] The plate is made of aluminum, machined and then hard anodized to a black finish. Because it's machined from a block of aluminum, it's extremely rigid and sturdy. It can also be used with other lenses as long as the lens tripod mount matches the plate's dimensions. It comes with one 3/8" and one 1/4" mounting screw, but these can be removed or swapped. [Installation Instructions] The original tripod mount has two screw holes. The lens plate has two fixing screws (a 3/8" screw and a 1/4" screw), so align them with the respective holes and use a coin or similar tool to tighten the screws. [Other Features] Two stopper screws are included to prevent the tripod from falling off when attached to the head. These screws are included with this product, so please use them as appropriate. [Product Overview] This is an Arca-Swiss compatible lens plate for the Nikon Z mount telephoto zoom lens Z 180-600mm f/5.6-6.3 VR. [Product Features] The lens is usually attached to a tripod head using a screw, but by using this product, it can be attached and removed from the tripod head with just one touch. This is a special product that is designed to fit the bottom dimensions of the original tripod mount. [Installation Instructions] The original tripod mount has two screw holes. The lens plate has two fixing screws (a 3/8" screw and a 1/4" screw). Simply align the screws with the corresponding holes and use a coin or similar tool to tighten the screws. [Materials] The material is aluminum, which is machined and then hard anodized to a black finish. Since it is machined from an aluminum block, it is very rigid and sturdy. [Other features] Two stopper screws and tools are included to prevent the camera from falling off when attached to the tripod head. [About F-Foto] [Established in 2012] We are a Japanese camera accessory manufacturer (headquartered in Gunma Prefecture). [Online Only] As an online-only manufacturer without a physical store, we are able to deliver high-quality products at reasonable prices. [Many Highly Rated Products] We offer a wide variety of highly rated (over 300 reviews) original products, including shoe covers, tripod mounts, lens plates, and compatible hoods. [High Quality (Inspected at Domestic Factories)] All products manufactured overseas are inspected at our domestic factories and delivered to Amazon warehouses before being delivered to customers. [Reliable Guarantee] In the unlikely event of an initial defect, we will provide replacement support, so you can purchase with confidence. Regarding compatibility: The Arca-Swiss compatible shape is not a strict standard, so some products (especially lever-type heads) may not be compatible. If you discover after purchase that a product not listed here is incompatible, please contact us. [Confirmed compatibility] Heads: RRS BH-30, BH-25LR, B2-L, GITZO GH1382QD, Peak Design Travel Tripod, SIRUI A-10R, Leofoto G4, LH-30, ARCA-SWISS P0 hybrid, Vanguard BH-50, Neewer ball head, TYCKA ball head, Neewer QR clamp, SUNWAYFOTO DLC-60LX, MENGS CL-50S, DC-38Q. [Incompatible heads] FALCAM TreeRoot. For other heads, please contact us. We are currently collecting information.





