Tamiya RC System No. 68 Finespec 2.4G 4-Channel Radio Transmitter and Receiver Set 45068

[Enjoy comfortable operation of 1/14 RC trailers and 1/16 RC tanks] This 4-channel radio control set was developed to comfortably control the MFC unit and DMD unit, adding a variety of action to 1/14 RC big trucks, 1/16 RC tanks, and 1/10 RC pickup trucks. The transmitter features a self-neutral stick-type transmitter. In addition to trim levers (digital trim) for each channel, it also features 10 function buttons for one-push control of various operations, such as firing the tank's main gun and machine gun, and operating the truck's horn and lights. Presets are available for each MFC unit and DMD, making setup easy. In addition, you can change function button settings, change the output channel position (channel swap), switch between forward and reverse (channel reverse), and adjust endpoints and sub-trims. The backlit LCD screen displays various settings and can store custom settings for up to 15 units. Of course, the 2.4GHz radio is used, allowing you to enjoy simultaneous operation of multiple units regardless of band (frequency). Another feature is the one-to-one correspondence (pairing) between the transmitter and receiver, which minimizes interference.

[Equipped with 10 Function Buttons] The transmitter has 10 function buttons: six on the bottom left of the front panel and two on each side of the top panel. Firing an RC tank's main gun or machine gun, adjusting the volume, and turning the lights on and off, as well as switching the lights and horn on an RC trailer—actions that require multiple operations—can be performed with a single push of a button, further enhancing the fun of control. Additionally, the LCD screen displays a variety of information, including transmitter voltage and trim values, both during setup and at all times. The sticks can also be adjusted to your desired length by loosening the 3mm set screws at the tips and rotating them (turning left extends, turning right retracts).

[Basic Specifications] [TTU-11 Transmitter] Operation Method: 2-stick type, 4 channels + 10 function buttons. Transmitting Range: 2.4GHz. Power Source (Sold Separately, Not Included): Four 1.5V AA Alkaline Batteries (Rechargeable batteries are not supported). Current Consumption: Maximum 140mA (at 6V).

[TRU-11 Receiver] Receiving Frequency: 2.4GHz. Power Source: Maximum 7.2V (Requires power supply from units equipped with a BEC circuit). Current Draw: 40mA (5V). Size: 38 x 27 x 18mm (excluding protrusions). Weight: 9.9g.

[Caution] This product (TTU-11, TRU-11) cannot be used in combination with any other transmitter (TTU-09) or receiver (TRU-09). The receiver (TRU-11) for this product does not have a built-in BEC (Receiver Voltage Converter). If using an ESC (Electric Speed ​​Controller), be sure to use one with a built-in BEC. Please note that Tamiya ESCs TEU-101BK and TEU-104BK do not have a built-in BEC and cannot be used with these vehicles. This product should only be used with electric RC cars for ground driving. The receiver (TRU-11) can be purchased separately from Tamiya Customer Service. Functions not originally built into the MFC and DMD units will not function when used with this product.

This product requires a power source to operate, but does not include batteries, batteries, or a charger. This product does not use fuel. This product does not include fuel. This product does not include paint, adhesives, oil, grease, or tools. This 4-channel radio control set was developed to comfortably control MFC and DMD units, adding a variety of actions to 1/14 RC big trucks, 1/16 RC tanks, and 1/10 RC pickup trucks. The transmitter is a self-neutral stick type. In addition to trim levers (digital trim) for each channel, the 10 function buttons provide one-push control for a variety of operations, including firing a tank's main gun and machine gun, operating a truck's horn, and activating its headlights. Presets are available for each MFC unit and DMD, making setup easy. In addition to changing function button settings, you can also change the output channel position (channel swap), switch between forward and reverse (channel reverse), and adjust endpoints and sub-trims. The backlit LCD screen displays various settings and can store custom settings for up to 15 vehicles. 2.4GHz allows you to enjoy simultaneous operation with multiple vehicles regardless of band (frequency). One-to-one pairing between the transmitter and receiver minimizes interference. Power Supply (sold separately, not included): Four 1.5V AA alkaline batteries (rechargeable batteries cannot be used)