Diabolus Seat for Honda Hunter Cub CT125 Diablo Custom Work Seat Super Ultra-Low (CT44 Low)

―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹― 🛫【Certified Store on JOOM】 A Japanese seller delivering high-quality products across borders! 📦【Shipped from Japan】 We pack carefully and deliver promptly and securely. 🔍【Strict Inspection Based on Japanese Quality Standards】 Only carefully selected products of excellent quality are delivered. 📒【Japanese Instruction Manual May Be Included】 We recommend using a text recognition app for translation. 🛍️【Some items may be based on international specifications】 Thank you for your kind understanding in advance. 👍【If you are satisfied with the product, please "Follow" our store and leave a review!】 Your support means a lot to us 💖 ―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹― ⚠️【Attention! Please be sure to read before purchasing】⚠️ Does this product match the conditions below? Please check carefully before placing your order. 🔌【Voltage Compatibility】 This product is designed for use in Japan and operates on 90–110V. Using it with a different voltage may cause malfunction or damage. 🔌【Plug Type】 The plug type is Type A or Type B, which is standard in Japan. You may need a plug adapter for use in other countries. 💡【Important Notes on Transformers and Adapters】 🔻 A transformer adjusts the voltage to match your device's requirements. 🔻 A plug adapter only changes the plug shape and does not convert voltage. 👉 Using only a plug adapter without a transformer may damage the product. 🚫【Disclaimer】 We are not responsible for any damage or malfunction caused by improper use without a transformer. ―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―

Diablo Seat Super Low for CT125 Width: (tip) 10cm (maximum width) 29cm Length: 40cm Height: 6cm This seat for the Hunter Cub CT125 is from Diabolus, a Thai K-SPEED design brand. Its gloss black finish creates a luxurious look. Among the many low-down seats available, this super low-down seat offers exceptional foot reach. Not only is it lower than the factory seat, but it's also an ultra-thin seat with a narrow front section for superior foot reach. [Installation Instructions] 1. Remove the nuts securing the factory seat. 2. Remove the front washer and rubber ring. 3. Remove the factory seat from the stays. 4. Remove the rubber ring and spacer from the factory seat. 5. Install the spacer and rubber ring onto the new seat bolts. 6. Insert the seat bolts into the stays. 7. Install the rubber ring and washer onto the seat bolts. 8. Finally, tighten the nuts. [Waterproofing] This seat is not completely waterproof. If exposed to heavy rain, some water will seep in through the stitching. If you are using an outdoor parking lot or are concerned about this, please apply waterproof spray to the seams before use, or take measures such as using wax or sealant. Please do so.