Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
[Metal Claw QI] This smartphone holder is constructed entirely from aluminum alloy. Simply push up the upper arm with your smartphone to attach and detach it. The height of the lower arm can be adjusted to suit your smartphone's wireless charging position. The claw can be adjusted in six steps from 13 to 18 mm to accommodate different smartphone thicknesses. Guide arms on both sides make it easier to aim at the center and prevent lateral movement. The dial on the back locks the arm in place to prevent it from opening during driving. The standard vibration damper efficiently absorbs high-frequency vibrations from the engine, reducing the risk of damage to your smartphone's image stabilization. The KDR-M23A model is recommended for those who are concerned about plastic deterioration, want a sturdy aluminum holder, prefer a holder with a unique metallic feel, or want a QI-compatible holder.
[Compatible models] iPhone 15 / 15Pro / 15Pro Max / 15Plus / 14 / 14Plus / 14Pro / 14Pro Max / 13 Pro Max / iPhone 13 Pro / 13 / 13mini / 12 Pro / 12 / 12 Pro Max / 12mini / SE 3 / SE 2 / 11 / 11Pro / 11Pro Max / X / XS / XR / XS Max / 8 / 8 Plus / Samsung Galaxy / Google Pixel / Kyocera Torque / Sony Xperia / Sharp Aquos, and other QI-compatible models.
*Please check the actual size, including the requirements for smartphone accessories such as cases. This applies to holding and charging; camera exposure is not included in the requirements. ■ Height: 125-180mm, Width: 63-90mm (Please make sure your smartphone model is within the range.) ■ Thickness: 18mm or less (Please be careful with thicker smartphone models and cases.) ■ Excellent compatibility, as it can accommodate thicknesses up to 18mm without affecting smartphone cases or charging rings. ■ If the smartphone case contains metal or magnetic elements, the protection will be activated and the charger will stop for safety reasons. A thick smartphone case will reduce the wireless charging range and prevent charging. ■ As a precaution, we recommend using a safety strap (KDR-SFB-S) or a carabiner to connect to the handle after setting up the holder.
[QI Charging] QI wireless charging is possible using two input methods: vehicle 12V and USB (QC3.0). ■ Output: QI 15W/10W/7.5W/5W *Charges at the power required by the model. ■ 12V Input: Connect to a vehicle's 12V power source for wireless charging. *Cannot be used in electric, 6V, or 24V vehicles. ■ USB Input: Connect to a USB power source QC3.0 for wireless charging. *Main unit connector Type A. Mobile devices may be shut off due to power consumption control. Do not get the USB connector wet in rainy weather. ■ Waterproof: IP66 waterproof, even in sudden rain showers. ■ Power Switch: ON/OFF only. Automatically powers up when 12V is applied from 0V. ■12V wiring: 1.75m inconspicuous black double cord (white lettering on the positive side), (with fuse holder, connector, and convertible terminal) ■USB wiring: 1.2m inconspicuous black double cord (white lettering on the positive side)
■Note: If you are unfamiliar with voltage drop (including professionals), please wire the negative terminal directly to the negative terminal. Body earthing can only be used if you can confirm that the resistance between the negative terminal and the earth point is 0 Ω. Do not connect the earth to a point with unstable resistance, such as the handlebars. Be careful of voltage drop due to a decrease in the contact area of crimp terminals. *With earth resistance, the voltage is normal when there is no load, but drops when there is a load. To check the power supply, be sure to measure the load voltage under the following conditions: (When the wiring is connected and the circuit is complete, the smartphone holder's power switch is on, and the measurement is taken by placing the probe on the SAE connector with a gap between them.) *Measuring voltage without a load does not determine whether the power supply is good or bad.
[Product Specifications] ■Holder Size: Height 125-180mm, Width 63-90mm, Thickness 18mm ■Material: Aluminum Alloy ■Weight: 471g ■Set Contents: Main Unit (1-inch ball), Bar Mount (1-inch ball/32mm/15mm width), Diameter Conversion Attachment (12/22/25.4mm), 2mm Rubber Tape, Hex Wrench, 60mm Aluminum Intermediate Mount (KDR-R1-3) (Includes SST), Silicone Pad for Arm Color Change, SAE Harness (Fuse Holder/Bullet), Conversion Terminal (Flat Y-Type/Stag Beetle Terminal), USB Harness, Spare Fuse, Cable Ties ■Instruction Manual (Online Only): As part of our decarbonization efforts to reduce our environmental impact, we have decided not to include a paper manual. You can view or download the instruction manual from each product page on the Kaedear official website. ■Brand: Kaedear
[Manufacturer's Warranty] ■ Manufacturer's warranty period: 1 year (expires on the same day as the date of purchase) At Kaedia, we provide after-sales support to ensure customer satisfaction. Our nationally certified staff will provide expert advice on product and motorcycle installation, and we'll be happy to assist you with any questions you may have. In the unlikely event that a defect is diagnosed as being due to a product defect, we will review the matter in accordance with our manufacturer's warranty regulations and provide a free repair or replacement under the manufacturer's warranty. For commercial use, the manufacturer's warranty period will be halved (e.g., if the manufacturer's warranty period is 1 year, it will be reduced to 6 months, expiring on the same day as the date of purchase). For details, please see the manufacturer's warranty regulations on our official website. We also provide support after installation and use. As a Japanese manufacturer, we offer customer service with a spirit of hospitality. Please feel free to contact us.
[Metal Claw QI] This smartphone holder is constructed entirely from aluminum alloy. Simply push up the upper arm with your smartphone to attach and detach it. The height of the lower arm can be adjusted to suit your smartphone's wireless charging position. The claw can be adjusted in six steps from 13 to 18 mm to accommodate different smartphone thicknesses. Guide arms on both sides make it easier to aim at the center and prevent lateral movement. The dial on the back locks the arm in place to prevent it from opening during driving. The standard vibration damper efficiently absorbs high-frequency vibrations from the engine, reducing the risk of damage to your smartphone's image stabilization. The KDR-M23A model is recommended for those who are concerned about plastic deterioration, want a sturdy aluminum holder, prefer a holder with a unique metallic feel, or want a QI-compatible holder.
