Feature:
1. SCOPE of APPLICATION: The magnetic print bed is a adhesive magnetic double layer, suitable for 3D printing
2. REPEATED USE: The magnetic print bed can be used repeatedly, which is manual pickup, not easy to warp edges
3. DURABLE and RELIABLE: The magnetic print bed has high temperature resistance, durability and strong magnetism
4. CONFIDENCE to USE: The magnetic pole can be used in any direction. The printed frosted layer of the magnetic print bed has strong adsorption force and stable toughness
5. CONVENIENT and PRACTICAL: The fixed layer of the magnetic print bed is durable and does not need to be replaced, and can be matched with multiple printing layers
Specification:
Item Type: Magnetic Print Bed
Material: High Toughness Frosted Silica Gel
Product Thickness: Double Layer, Approx. 1.8mm0.07in
Requirements for Use: the Temperature of the Hot Bed Does Not Exceed 60 degrees , or Printing on the Cold Bed
Suitable for Ender 3 Sapphire Pro.
Package List:
1 x Magnetic Print Bed
Note:
1. In order to effectively achieve a good non curling edge, it is recommended that the temperature of the hot bed should not exceed 50 degrees . If there is no hot bed, please use local speed control. The first layer feeds 17 and the third layer starts to adjust faster.2. Be sure to level it before use. If the machine cannot be leveled, please place your order carefully.3. Do not directly touch the high temperature nozzle to the appearance. Please take the mold in time after printing, and do not take the mold again the following day. In this way, the model will be tightly adsorbed on the printing appearance, and it is not easy to take the model and shorten the service life of the platform.4. If it is found that the first layer will not stick during use, it is related to whether the third party machine and material platform used are leveled. Because the machines and consumables manufacturers on the market each have their own design structures and printing temperatures. Therefore, it is not possible to test one by one, and you need to test the appropriate temperature and adjust the parameters by yourself.
