اللون
أسود
الوصف
--------------------------------------------------------------------------------- Sold and shipped by Japanese sellers * Operated by Japanese sellers - Japanese sellers with trust and experience. * Direct from Japan - All items are carefully packed and shipped promptly from Japan. * Highest quality control - Inspected by Japanese standards to ensure high quality products. ---------------------------------------------------------------------------------
Total length (m):8.09 Number of parts (pieces): 8 Closing dimensions (cm): 132 Weight (g): 285 Tip diameter/base diameter (mm): 2.1 (2.0)/24.2 Weight load (No.): 1.5-6 Compatible underwater thread (metal/nylon): 0.1-0.4/0.8-1.5 Carbon content (%): 99 Multi:81-72 *The tip diameter is the outer diameter closest to the rod tip, without any parts or spools attached, and the figure in parentheses is the outer diameter of the tip of the material. X45: The relationship between the orientation angle of carbon fibers and the elastic modulus is extremely special, and if the angle of the carbon fibers deviates even by one degree, the elastic modulus will drop significantly. Considering the performance of the rod, 0°, 45°, and 90° are ideal structures, but if you use an intermediate angle like other X structures, the elastic modulus of "twisting" and "twisting" will decrease. Also, in order to achieve the same power as the "X45" at intermediate angles, a significant increase in weight would be required. "X45" is the optimal structure that maximizes effectiveness with minimum weight. High-density HVF carbon: In addition to increasing the elasticity of the carbon fiber itself, we focused on the amount of resin that plays the role of an adhesive that holds the carbon fiber together. By reducing the amount of resin, which can be called excess fat, and increasing the density of the carbon fibers that form the muscles, we pursue the development of stronger and lighter carbon sheets. By increasing the density of carbon instead of resin, it exhibits much higher performance (power, sharpness, operability, sensitivity) than before. V-Joint: Daiwa's unique bias structure is used at the joint joint where power loss due to strain tends to occur. This creates a beautiful curve that looks like a dress. Since power loss due to distortion is reduced, the original power, response, and sensitivity of the material can be fully demonstrated. New texture grip: A grip that uses a special coating that is non-slip and has a high grip even when wet. It increases the confidence of the hand butt, which plays an important role in supporting the weight of the rod and sweetfish when pulling it out. Single section multi-length/anti-stick ring/karaman tip
